What's new
By:
Filters
Old Chevelles

Welcome to OldChevelles.com, built by Auto Enthusiasts for Auto Enthusiasts. Cars are not our only interests so please feel free to post about any subject the community might enjoy or you just feel you need to air.

We respect free speech and constructive dialogue however we don't allow threatening talk against members, nudity, or pornography. Threads are monitored and trolls are not tolerated.

This site is completely free and there are no costs. Please enjoy and provide feedback.

  • We've enabled the website app for anyone who wants to use it on a mobile or desktop device.

  • We've changed the header logo to display our Member's Cars.

    If you'd like your car to show up there, go to the forum Site Bugs & Feature Requests and post your image in the "Member's Car Pictures for the Header Logo" and we'll add your car into the lineup.

Recent content by Quakes 454

  1. Quakes 454

    Horn issue on a 68 SS

    Me either but two hot leads seems strange I've done all I can. Will leave this up to the local shop Thanks
  2. Quakes 454

    Horn issue on a 68 SS

    Should I have to two hot leads to the button? I tested each separately using the column as a ground and they are both hot
  3. Quakes 454

    Horn issue on a 68 SS

    It looks new but I'm sure that doesn't matter
  4. Quakes 454

    Horn issue on a 68 SS

    No ....only clicks when I ground the relay's terminal to a ground source. Horns work when I jump to hot side to the battery. Getting power to the aftermarket steering wheel horn button. Horn button terminals have continuity .thats as far as I've gone
  5. Quakes 454

    Horn issue on a 68 SS

    Will do thanks so much for your guidance . Keep you updated with that
  6. Quakes 454

    Horn issue on a 68 SS

    So no reason, at this point to pull the horn cap and look at the horn switch ? It's in the relay?
  7. Quakes 454

    Horn issue on a 68 SS

    Should I ground the wire as well that goes to terminal A?
  8. Quakes 454

    Horn issue on a 68 SS

    Ok thats what I did and relay was clicking
  9. Quakes 454

    Horn issue on a 68 SS

    Bear with me hahaha, So if I jump that wire that I pulled from terminal A to positive should the horns sound. Doing this from the engine compartment I mean
  10. Quakes 454

    Horn issue on a 68 SS

    Yes I tested the continuity between the relay mount and ground and that was ok. Now the wire that I disconnected from terminal A, what does that feed?
  11. Quakes 454

    Horn issue on a 68 SS

    I disconnected the wire from terminal A and grounded the terminal with a jumper to a good ground. The relay is clicking no sound though. Should I be jumping the wire from A terminal to ground to get the horn to sound?
  12. Quakes 454

    Horn issue on a 68 SS

    Hi just. Checking if you are on I'm about to check the ground on the relay
  13. Quakes 454

    Horn issue on a 68 SS

    Very tight quarters to the relay bolt as they installed a vac pump next.to it. Have to get some appropriate tools to remove the relay. I will get back to you.Appreciate your help.
  14. Quakes 454

    Horn issue on a 68 SS

    When I get home can we continue later my phone is about to die
  15. Quakes 454

    Horn issue on a 68 SS

    So ground out the terminal marked "A " to the body?
See more
Top Bottom