New Shop

[kmakar]

Getting there

Didn't want it sitting on blocks off the ground? That's alot of weight to be suspended to the side of that building.

 

[Nashville Cat]

That's the tallest 12' high roof I've ever seen
Tons of space

 

[kmakar]

That's the tallest 12' high roof I've ever seen
Tons of space

That's Rick's client's shop. Mine hasn't been built yet. Rick is installing AC for his client and those walls are 16'.

 

[Shovelrick]

Didn't want it sitting on blocks off the ground? That's alot of weight to be suspended to the side of that building.

It's around 125 lbs., I'm down to around 150 now (long story) and stood on the end and it didn't budge or even know I was there lol

 

[Shovelrick]

That's the tallest 12' high roof I've ever seen
Tons of space

Oh this is my engine builders home shop, 16' side walls

 

[Shovelrick]

These are the wall studs, 2- 2"x2" with a 2"x2" spacer in between, I should mention I have the air handler off center that much to give min clearance of 22" to remove the evap coil or blower assembly for any repairs or replacement, I wanted to keep the module at the top of the cabinet so I didn't flip it per R hand air flow instructions, I've found the blower motor module doesn't fail with it at the top from condensation getting inside like it does when its flipped and at the lower section of the cabinet and collecting moisture, I guess its a Fl thing with our high humidity...? Tech support don't have a clue when asked, I'll post a pic of it in the cabinet tomorrow

 

[Shovelrick]

I attached the bracket with 3/8 all thread at each side and dbl nutted , forgot to post pics