Richard150MPH
Veteran Member
Giving myself a headache trying to make sense of camshaft data for my hot Lotus engine.
Does not help that the Euro companies use a different lash measurement than US do.
Euro also do not seem to give centerline.
I have three or four to compare if possible.
Need to see if Isky still does a grind too.
It seems the cam I had ground is not going to work, too much lift and the did not relieve the shaft at the heel.
So my stock mushroom lifters would be hitting the cam blank outside of the lobe.
Does not help that the Euro companies use a different lash measurement than US do.
Euro also do not seem to give centerline.
I have three or four to compare if possible.
Need to see if Isky still does a grind too.
It seems the cam I had ground is not going to work, too much lift and the did not relieve the shaft at the heel.
So my stock mushroom lifters would be hitting the cam blank outside of the lobe.
