There was a Grabber Blue '70 Mach One in my town, with white interior and it always stuck in my ming. All the ones we have on the lot anre greys and black, and all black interiors. Where are all the good color combos?
Welcome to OldChevelles.com, built by Auto Enthusiasts for Auto Enthusiasts. Cars are not our only interests so please feel free to post about any subject the community might enjoy or you just feel you need to air.
We respect free speech and constructive dialogue however we don't allow threatening talk against members, nudity, or pornography. Threads are monitored and trolls are not tolerated.
This site is completely free and there are no costs. Please enjoy and provide feedback.I had a Green with black stripes with rear window louver 70 Mach 1 4 spd 351c 4V heads and headers, stock posi rearend, forgot mileage but fairly low back 1981/2 that was a blast to drive, always wondered how it compared to a 70 Camaro handling, it handled fantasticThere was a Grabber Blue '70 Mach One in my town, with white interior and it always stuck in my ming. All the ones we have on the lot anre greys and black, and all black interiors. Where are all the good color combos?
We “Might” be buying this, Kathy showed it to me and she’s all set to start packing till I said “I’m keeping the ac business open here” then , so she’s still thinking she wants to move there, Kentucky 15-20 min from our oldest girl, but not liking the thought of me keeping the bus here and I doubt I can just start a $$$ making company overnight there lol, guess I’ll know what she wants to do in the next few daysView attachment 17205
More acreage the better IMO. Not all has to be mowed.Do you really want more than an acre to mow ? And don't forget, KY has a 7% income tax and Florida is zero !
Looked like open land to me. To each his own, but I want no part of mowing 3+ acres.More acreage the better IMO. Not all has to be mowed.
I have 3+ acres and enjoy getting on my tractor and mowing it plus I have room for everything I want to do on it.Looked like open land to me. To each his own, but I want no part of mowing 3+ acres.
And the income tax was my main point, not the property.
I don't think they make a set that doesn't need small dents for the steering shaft and the pass side upper control arm.Don't do it! The difference is in the frame, if it was a minor difference they'd have designed them to fit all years. Hate to see you go beating up a set of coated headers..,.uncoated would still off my list. I spent several hours making a set of 2 inch vintage appliance headers fit my 69, and they were designed for a 69. Welding, pie cutting, rewelding, fitting and finishing.....then ceramic coating.
I haven't placed the order yet. Chickened out LOLI had to make a Dimple in mine because I ran the bolts that hold the motor mount frame stands to frame up from underneath to make it easy to put the nuts on, well on the Drv side the bolt hit a tube so I took a 4.5” grinder and cut it down but still needed a Dimple so I used an old broom stick against the tube and hit it with a hammer till it cleared, IIRC the diff in HP on a 600hp BBC going from 2” down to 1 7/8” headers looses about 10hp or less but down to 1 3/4” IIRC was over 20hp, my engine guy said I should use 2+” but he’s a drag racer, and his dyno headers wouldn’t work because flanges hit the head studs, the Patriots I have was no problem with studs
See above; I didn't place the order. But seriously looking at the Hooker 2" tubes.Nope, I never force feed advice.......I couldn't handle the responsibilty. I've modified many a header, the fenderwall headers for my '55 wouldn't allow the wheels to turn more than hafl the way, so I cut the head flanges all but the top 1/2 inch, and lifted them up which moved the downtubes outboard about 3 inches. Then just filled with weld, a lot of weld. I may have cut pieces of metal to fill, can't remember. Anyways, they came out great but they weren't coated till they fit rigft. The others I mentioned above. I've got a set of hookers here, 2.125 long tube Super Competitions, and they are new, and need a bunch of mods to fit right. Waiting for the right car. I've also got a set of 2.125s from the legend, Lemons, and they've been coated, have O2 bungs, and came on a car I sold. I wasn't going to let them get away. Those are waiting for the right car also. Nice headers, I believe they're up around $2000 or so.
You have Eddy RPM heads? are they raised Exh port?See above; I didn't place the order. But seriously looking at the Hooker 2" tubes.
Hooker claims they fit 66-67
Hooker Headers 2455-1HKR Hooker Competition Headers | Summit Racing
Free Shipping - Hooker Competition Headers with qualifying orders of $109. Shop Headers at Summit Racing.www.summitracing.com