Got the rear bumper installed. Took me a bit because I had to repaint the tail light housings.
It looks “ok”. Not great, and it’s not tightened down all the way. The issue is when the upper two bolts on the outer brackets are tightened all the way up, the top of the bumper gets pushed up and rotated toward the back of the car.
All four bolts on each of the outer brackets need to be shimmed, but there is no way to get shims on the top ones.
Not sure how to proceed here short of modifying the rear bumper brackets. I can get the bumper into the right position but as soon I tighten everything down it’s thrown out.
It looks “ok”. Not great, and it’s not tightened down all the way. The issue is when the upper two bolts on the outer brackets are tightened all the way up, the top of the bumper gets pushed up and rotated toward the back of the car.
All four bolts on each of the outer brackets need to be shimmed, but there is no way to get shims on the top ones.
Not sure how to proceed here short of modifying the rear bumper brackets. I can get the bumper into the right position but as soon I tighten everything down it’s thrown out.