The instructions with the Autowire kit were vague at best.
I get nothing when I activate the switch, no motor no washer pump. It’s possible either the switch or the motor are bad but I want to get the wiring nailed down first. My thoughts are wiring is the most likely followed by the dash switch, followed by both the pump and motor being bad. This is on a 69 with depressed park wipers.
Ive tried three different wiring schemes. The first picture is how I had it wired based on the vague Autowire instructions.
The second photo labeled A111 is one internet example of how to wire it I found.
The third photo labeled A1112 is another internet example.
None of these did anything.
Using a test light I check for power when I had it hooked up like A1111:
White - wiper feed power wire, positive light in both locations
Black - wiper feed ground, positive light accompanied by a click coming from the motor area
Lt Blue - high speed ground, positive light
Dk blue - low speed ground? Positive light but very dim.
I think I’m going to order a new switch because the one I have is the original and sketchy.
Any thoughts?
I get nothing when I activate the switch, no motor no washer pump. It’s possible either the switch or the motor are bad but I want to get the wiring nailed down first. My thoughts are wiring is the most likely followed by the dash switch, followed by both the pump and motor being bad. This is on a 69 with depressed park wipers.
Ive tried three different wiring schemes. The first picture is how I had it wired based on the vague Autowire instructions.
The second photo labeled A111 is one internet example of how to wire it I found.
The third photo labeled A1112 is another internet example.
None of these did anything.
Using a test light I check for power when I had it hooked up like A1111:
White - wiper feed power wire, positive light in both locations
Black - wiper feed ground, positive light accompanied by a click coming from the motor area
Lt Blue - high speed ground, positive light
Dk blue - low speed ground? Positive light but very dim.
I think I’m going to order a new switch because the one I have is the original and sketchy.
Any thoughts?