With some help from my visiting Dad and Mother Nature (warm weather) I’m finally getting to put down some color. No matter how many times I blocked (using guide coat and appropriate blocks) there are some things that showed up and needed to be corrected before I could go on. Frustrating.
Due to lack of space and wanting to get good coverage, car will be done in pieces. Paint is a solid red. Using a tinted epoxy as sealer to help ensure good coverage. BC is Valspar ($500 a gallon ). Clear coat will be Tamco Glamour clear IIRC.
I wanted to start with a small piece to make sure it lays down good.
Here is my first step. It’s only the sealer. Will spray BC and CC tomorrow.
Due to lack of space and wanting to get good coverage, car will be done in pieces. Paint is a solid red. Using a tinted epoxy as sealer to help ensure good coverage. BC is Valspar ($500 a gallon ). Clear coat will be Tamco Glamour clear IIRC.
I wanted to start with a small piece to make sure it lays down good.
Here is my first step. It’s only the sealer. Will spray BC and CC tomorrow.
Attachments
Last edited: